Service
Selective Demolition
Surgical concrete removal — pull out exactly what needs to go without damaging what stays.
About Demolition
Selective demolition removes specific structural elements — slabs, walls, footings, columns — while protecting adjacent structures. We combine sawing, breaking, and removal so renovations and retrofits stay on schedule.
Selective demolition is the surgical version of concrete removal — taking out exactly the slab, wall, footing, or column the project needs gone, without damaging the adjacent structure that has to stay. At Reliable Concrete LLC we combine flat sawing, wall sawing, core drilling, and controlled breaking to deliver clean removals on renovations, retrofits, equipment swaps, and industrial decommissioning projects across the Gulf Coast.
The difference between selective demolition and traditional demo is precision. Instead of swinging a hammer and hoping nothing important gives way, we saw-cut the perimeter first, isolate the section, scan for embeds, then remove the cut block in pieces small enough to handle without disturbing the surrounding structure. That keeps adjacent walls, slabs, finishes, and equipment intact — and it keeps your project on schedule.
We handle interior renovations, equipment pad removal, structural retrofits, and industrial decommissioning across Gulfport, Biloxi, Pascagoula, New Orleans, Mobile, and the surrounding 500-mile region. We coordinate hauling and disposal, work tight-access spaces other crews cannot reach, and protect what stays as carefully as we remove what goes.
What you get
- ✓Saw-cut and remove approach
- ✓Adjacent structure protection
- ✓Hauling and disposal coordination
- ✓Tight-access capable
Common applications
- Interior renovations
- Equipment pad removal
- Structural retrofits
- Industrial decommissioning
Our demolition process
- 01
Scope & protection plan
We walk the area with the GC, identify what stays and what goes, and plan protection for adjacent structures.
- 02
Scan & isolate
GPR scanning maps embeds. Saw cuts isolate the removal section from the structure that stays.
- 03
Controlled removal
We remove in sections — small enough to handle, large enough to be efficient — using rigging, breaking, or coring as needed.
- 04
Haul & dispose
Cut sections leave the site cleanly through coordinated hauling and disposal so the area is ready for the next trade.
- 05
Site handover
We hand the area back swept, edges clean, and ready for finishing, equipment install, or the next phase.
Why GCs choose us for demolition
Saw-cut, then remove
Perimeter saw cuts isolate the removal section so adjacent structure stays intact.
We protect what stays
Edge protection, finish protection, and section-by-section removal keep your existing structure safe.
Tight-access capable
Crawl spaces, equipment rooms, basements — we bring tools that fit where larger crews cannot reach.
Hauling included
We coordinate dumpsters, hauling, and disposal so you do not have to manage another sub.
Equipment we run
- ▸Diamond saws (flat, wall, wire, hand)
- ▸Hydraulic breakers and chipping hammers
- ▸Skid-steer attachments for tight access
- ▸Rigging, chain, and lifting gear
- ▸Dumpster and hauling coordination
Industries we serve
Frequently asked questions
What is selective demolition?
Selective demolition is the targeted removal of specific structural elements — slabs, walls, columns, footings, equipment pads — while protecting the surrounding structure that needs to stay. It is the right approach for renovations and retrofits where traditional demo would cause too much collateral damage.
How is selective demolition different from regular demo?
Regular demolition takes out everything in a footprint. Selective demolition saws the perimeter first, isolates the removal section, and pulls out only what the scope calls for — leaving adjacent slabs, walls, finishes, and equipment intact.
Can you work in occupied buildings?
Yes. We use dust control, slurry containment, and section-by-section removal so we can demo inside hospitals, casinos, hotels, and operating industrial plants while the building stays in use.
Do you handle the hauling and disposal?
Yes. We coordinate dumpsters, hauling, and disposal as part of the scope so the cut sections leave the site cleanly and you do not have to manage another sub.
Can you work in tight spaces?
Yes. We bring saws, breakers, and skid-steer attachments sized for crawl spaces, basements, and equipment rooms where standard demo crews cannot fit.
Do you scan before demolition?
Yes — GPR scanning before any structural cut is standard. We map rebar, PT cables, and conduit so the saw cuts and removal sequence avoid damaging critical embeds.
Other services we offer
Concrete Scanning (GPR)
Ground penetrating radar scanning to locate rebar, post-tension cables, conduit, and voids before you cut.
Concrete Cutting
Full-service concrete cutting for commercial GCs and industrial facilities — clean cuts, on schedule.
Flat Sawing
Walk-behind flat sawing for slabs, pavement, and bridge decks up to 24 inches deep.
Wall Sawing
Track-mounted wall sawing for vertical and overhead cuts up to 30 inches deep.
Core Drilling
Diamond core drilling from 1" to 60" for plumbing, electrical, HVAC, and structural penetrations.
Ready to get started?
Get a fast, accurate quote from a local crew that shows up when they say they will.