Past work
Selected work from across the Gulf Coast and beyond. Browse more on our Facebook page.
The work below is a representative sample of the concrete cutting, scanning, core drilling, and selective demolition projects Reliable Concrete LLC has completed across the Gulf Coast and the broader 500-mile service region. Heavy industrial wall cuts at Ingalls Shipbuilding in Pascagoula, infrastructure work on the Bay Minette water tower in Alabama, specialty stone cutting in Memphis, large-diameter manhole coring in Gulfport, long-run flat sawing inside active facilities — every project is a different combination of saw, scope, and constraint.
What ties them together is the same approach: scan before you cut, protect what stays, and execute clean on the first try. That is what commercial general contractors and industrial facility owners hire us for, and that is what we deliver project after project.
The projects below highlight the equipment, methods, and coordination that go into each scope. If your project needs something similar — or something completely different — call Rocky and walk through it.
Wall Sawing · Industrial
Pascagoula, MS
Cut 2-foot-thick concrete walls inside an active shipbuilding facility. Required heavy-duty wall sawing, dust control, and tight coordination with on-site crews to avoid disrupting ongoing shipyard operations.
Concrete Cutting · Infrastructure
Bay Minette, AL
Concrete cutting work on a municipal water tower project. Required precision cuts at height with full safety protocols and coordination with the GC's schedule.
Specialty Cutting
Memphis, TN
Out-of-state mobilization for a specialty stone cutting job. Demonstrated our 500-mile service radius and ability to handle unique cutting challenges beyond standard concrete.
Core Drilling · Selective Demolition
Gulf Coast, MS
Diamond core drilling and surgical concrete removal across multiple commercial sites — pulling exactly what needed to go without damaging the structure that stayed.
Core Drilling · Utility
Gulfport, MS
Large-diameter coring on a manhole project — coordinating rigging, scanning, and clean removal of a 4-foot core for utility access.
Flat Sawing · Industrial
Gulf Coast, MS
Long-run flat sawing for utility trenching inside an active facility. Dust- and slurry-controlled cuts, scheduled around the client's production windows.
We post regular project photos and updates on our Facebook page.
Visit our Facebook pageLook across the projects above and you can see the range of equipment and methods we bring to a Gulf Coast jobsite. The Ingalls 2-foot wall cuts demonstrate our heavy industrial wall sawing capability — track mounted, low vibration, deep single-pass cuts inside an active shipbuilding facility. The Bay Minette water tower shows we will mobilize across state lines for municipal infrastructure work and hit the schedule.
The Gulfport manhole coring project is a representative large-diameter coring scope — 4-foot bit, anchored rig, scanning before drilling, clean removal of the slug. The industrial slab trenching work shows long-run flat sawing inside an operating facility with full slurry control so the client's production windows were never disturbed. The coastal coring and demolition projects show selective removal across multiple commercial sites with adjacent structures protected throughout.
And the Memphis stone cutting job? That is what our 500-mile service radius actually looks like. When the scope justifies the trip, we take the trip. Distance is rarely the constraint.
Up to 30-inch single-pass cuts in active facilities.
Cores from 1 inch up to 60 inches with full GPR scanning.
Trench cuts hundreds of feet with consistent depth and slurry control.
Up to 500 miles for projects that justify the trip.
Get a fast, accurate quote from a local crew that shows up when they say they will.